VHR
NHR power automatic testing system——5000 Series
Release time:2017-02-23 14:32:31 | viewed:

The 5000 series power test system is designed for high power conversion product testing, include 3 modules: 5500, 5600 and 5700. 5500 dedicated to UPS, inverter test, 5600 and 5700 are used to high-power AC-DC, DC-DC power supply product testing.


  


Ø Digital measurement system:

5000 series power supply test system contains a digital measurement system (DMS), 5500 and 5600 are standard DMS, 5700 is high speed type DMS. DMS will digitalize the analog signal real-time and then to carry on the analysis by digital processor. Depending on this technology, instead of a variety of measuring instrument or equipment that only have one single function, at the same time you can get more UUT (the device under test) test information in a test, but also you can greatly improve the speed of test.


Ø Flexible configuration:

The 5000 series system have abundant configuration and options, according to different test requirements for selection.


5500 system:

SYSTEM MEASUREMENT

MEASUREMENT

RANGE

RESOLUTION

ACCURACY

UUT Input

AC RMS Volts 

14,140,350V

0.004%FS

0.1%R+0.065%FS

AC RMS Current

35,70,100A

1,2,3mA

0.2%R+0.05%FS

AC Peak Current

50,100,150A

1,2,3mA

0.2%R+0.05%FS

AC True Power

5,10,15kW

0.15,0.3,0.45W

0.25%R+0.1%FS

UUT Output

DC Volts

±2,20,200,500V

0.003%FS

0.01%R+0.01%FS

Peak to Peak Noise

±100mV,500mV,5V

0.02%FS

1.0%R+2.0%FS

Ripple RMS

70mV,350mV,3.5V

0.012%FS

1.0%R+0.5%FS

DC Peak Volts

±20,200,500V

0.012%FS

1.0%R+0.02%FS

AC RMS Volts

14,140,350V

0.003%FS

0.1%R+0.065%FS

Timing

0-7 minutes

100ns

0.02%R+200ns

Frequency

10Hz-5MHz

1/100ns

0.016%R

waveform

vertical

Horizontal

 

 

512-4096 sample

 

 

10μs

 

 

0.02%R+200ns

THD(2-64th)

0-100%

0.01%

1%R

UUT Input-to-Output

Efficiency

0-100%

0.13%

1.5%R

Phase Angle

0-360°

0.1%

0.5°@60Hz

I/O Module(Expandable to 8)

Input Channels:16,external selected,differential inputs for UUT measurement. 8internally selected, differential inputs for measurement of loads and sources.

General Purpose Relays:8 DPDT with 5A/30VDC&120/240VAC rating.

Digital Outputs:16, 100mA/70VDC/0.5W.

Digital Inputs:8,two groups of four with common programmable threshold of±10V.

 

5600 system:

DMS

MEASUREMENT

RANGE/BANDWIDTH

RESOLUTION

ACCURACY

DC Volts

±2,20,200,500V

0.003%FS

0.01%R+0.01%FS

AC RMS Volts 

14,140,350Vrms

0.004%FS

±1.0%R+0.065%FS

DC Peak Volts

±20,200,500V

0.012%FS

1.0%R+0.02%FS

RMS Noise

10Hz-1MHz

70mV,350mV,3.5V

0.012 %FS

1.0%R+0.5%FS

Peak to Peak Noise

5kHz-1MHz

100mV,500mV,5V

0.02%FS

1.0%R+2.0%FS

Frequency

10Hz,5MHz

1/100ns

0.016%R

Timing

0-7分钟

100ns

0.02%R+200ns

Waveform Capture

DC 100MHz

0.003%

1%FS

Phase Angle

0-360°

±1% @50/60Hz

THD(2-64th)

0-100%

0.01%

1%R

I/O Module(Expandable to 8)

MULTIPLEXER

Input channels:16,differential

Output channels:2,differential

Bandwidth(-3db)

Output 1:100MHz  

Output 2:10MHz

Max voltage:±500V

Max current:100mA  

General Purpose Relays

Quantity:8  

Contact rating:5A,30VDC or 120/240VAC

RELAY DRIVERS

Quantity:16

Rating:48V @ 500mA

DIGITAL DRIVERS

Quantity:16

Rating:100Ma,70VDC,0.5W

DIGITAL RECEIVERS

Quantity:两组共8路

Input Voltage:±10V

Accuracy:1%

 
 In the previous:NHR load series products——AC load
 next article:9200 battery charging and discharging test system
Home | About us | Product | Service | News

京ICP备11026669号   京公网安备110108003886号   版权所有 Copyright(C)2016 北京品创联拓科技有限公司